Tips For Troubleshooting Samba Domain Join Verification Errors

These repair tips are worth reading if your computer is experiencing a Samba error while checking to join a domain. Invalid credentials.IP blocked.billing blocking.chargebacks or PayPal disputes.lock against fraud.OFAC.Password reset.Forgot username or password. Samba member site name

How do I authenticate Samba with Active Directory?

Set up smb.conf.Set up krb5.conf.Set the authentication method.Check the connection to make sure it works with the Windows Directory server active.Check authentication.Configure the portal user authentication method on.

While experimenting with setting up 4 samba as the giant PDC controller (primary domain) of their newly created EXAMPLE-Domain.COM domain, I naturally wanted to test whether clients could connect to a windows server independent from a managed Samba 4. domain.

Institution

The configuration is not very confusing. Since this is a test build for my own learning only, it might still be in the spectrum 192.168.15.0/25 had samba installed in the container Ubuntu lxc running under 20.04. Whether the domain file was still set to EXAMPLE.COM, the domain file is definitely example.com. Samba was often set up for machines according to the official documentation and the Ubuntu plus manual (very good at distinguishing between systemd module files!).

What is a samba domain member?

a is a domain-joined Linux computer running Samba that does not provide Internet Domain Services such as an NT4 elementary domain controller (PDC) or a Directory active (AD) domain controller (DC). On a real member of a Samba domain, you can:

The blog controller was installed using the incredibly simple samba tool’s domain deployment command, unless you have special settings.

The Windows Client was installed by running the virtual machine (using VMware Player) and connecting to the hard physical work network.

East

It’s definitely worth mentioning that I ran into the problem that the Ubuntu LXC container was not started using my fixed IP address, (in the specific container config file), but significantly with a DHCP address. This appears to be caused by a problem in the current netplan IP configuration package. This turned out to be fixed, but the DHCP address was also intercepted. So for a while, and only during domain preparation, the temporary ubuntu container had two IPs configured. Why a person is important, will soon find out.

Windows 7 Cannot Join The SAMPLE Domain

How do you fix the following error occurred attempting to join the domain?

enable SMB1 support. You press the Windows key R + to open Run.Check a third-party antivirus program. It is understood that the above error is caused by third-party anti-virus programs.Use a system restore point. Type recovery in the system search bar.

After the windows 7 client has been installed normally, it’s time to change the software settings to join the domain computer to the domain.

However, your first attempt failed because the EXAMPLE domain type was still not found. Indeed, some Windows machines received DNS servers, such as the DHCP server, neighboring DNS servers 1.1.1.1 and 8.8. 8.8 defined. To be able to join a location, the client domain controller must use it as a DNS server.

corn

The next attempt to login to the domain always failed with the following error:

error in domain join verification samba

The following error occurred while connecting to the “EXAMPLE” domain: Connection failed: unknown username or invalid password.

In order to join a domain, I need the credentials of the “Administrator” user. The error is saying that this password is incorrect, but the password must be checked three times and must be correct. You can check this by accessing the Netlogon share on the domain controller in Intarnet.become:

[email protected]:~# smbclient //localhost/netlogon -UAdministrator -c ‘ls’
EXAMPLEenter administrator password: [password entered]
. D 0 30 di. 08:16:53 March 2021
.. » >

Log Analysis

My first thought was that it could very well be a DNS server issue with Samba (the INTERNAL_DNS backend). Maybe I would say that the machine is not registered, is it true that you cannot create a DNS server on the internal surface in Samba?

error in domain join verification samba

After planning = log level 3 in /etc/samba/smb.conf (global other section) the domain should be tested by joining. It turned out that in /var/log/samba/log.samba there was an output:

next bound

[email protected] kerberos: as-req.COM from ipv4:192.168.15.10:49265 is for krbtgt/[email protected][2021/03/30 09:42:11.862685, 3] .. / ../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)

Kerberos: Client sent 128 file types:
[2021/03/30 09:42:11.862712, 3] ../../source4/auth/kerberos/krb5_init_context.Kerberos: lookup c:80(smb_krb5_debug_wrapper)
Pa-data pkinit [email protected] –.COM
[2021/03/30 09:42:11.862731, 3] ../../source4/auth/kerberos/krb5_init_context.Kerberos: c:80(smb_krb5_debug_wrapper)
To search for ENC-TS-Pa data, from [email protected]
[2021/03/30 09:42:11.862759, 3] ../../source4/auth/kerberos/krb5_init_context.Kerberos: c:80(smb_krb5_debug_wrapper)
PreauthenticationI was not found, return PREAUTH REQUIRED – [email protected]
[2021/03/30 09:42:11.863202, 3] ../../source4/smbd/service_stream.Stream_terminate_connection: c:67(stream_terminate_connection)
terminate connection * ‘kdc_tcp_call_loop -: tstream_read_pdu_blob_recv() NT_STATUS_CONNECTION_DISCONNECTED’
[2021/03/30 09:42:11.870595, 3] ../../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: AS-REQ [email protected] with ipv4:192.168.15.10:49266 to krbtgt/[email protected]
[2021/03/30 09:42:11.873167.3] ../../source4/auth/kerberos/krb5_init_context.Kerberos: c:80(smb_krb5_debug_wrapper)
Types sent by the client: encrypted label, temporary 128
[2021/03/30 09:42:11.873207, 3] ../../source4/auth/kerberos/krb5_init_context.Kerberos: lookup c:80(smb_krb5_debug_wrapper)
Pa-data pkinit [email protected] –.COM
[2021/03/30 09:42:11.873225, 3] ../../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: For ENC-TS-Pa lookups, from [email protected]
[2021/03/30 09:42:11.873284,3] ../../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)

Kerberos: successful pre-authentication ENC-TS [email protected] –.COM using aes256-cts-hmac-sha1-96[2021/03/30 09:42:11.873327, 3] ../../ auth /auth_log.c:635(log_authentication_event_human_readable)

Authentication: [Kerberos pre-authentication] Kdc,enc-ts [(null)][[email protected] user.COM] [Tue Mar 30, 2021 09:42:11.873314 CEST] [aes256-cts- hmac -sha1-96] [NT_STATUS_OK] discover workstation [(null)] remote [ipv4:192 web.168.15.10:49266]became [example][administrator] [S-1-5-21 -2031982775-3412234441- 723590836-500]. can Host be [NULL] 2, “eventId”: 4624, “logonId”: “logonType”: “f4940a1bcf532438”, 3, “status”: “NT_STATUS_OK”, “localAddress”: null, “remoteAddress”: “ipv4:192.168 .15.10:49266”, “Kerberos KDC”, “authDescription”: “servicedescription”: preauthentication, “enc-ts “clientDomain”: null, “clientAccount”: “[email protected]”, “workstation”: null, “becameAccount”: “Administrator”, “becameDomain”: “EXAMPLE”, “becameSid”: “S-1-5-21-2031982775-3412234441-723590836-500”, “mappedAccount”: “mappedDomain”: “administrator”, “EXAMPLE”, “netlogonComputer”: null, “netlogonTrustAccount”: null, “0x00000000”, “netlogonnegotiateflags”: 0, “netlogonsecurechanneltype”: “netlogonTrustAccountSid”: null, “passwordType”: “aes256-cts-hmac-sha1-96 “, ‘duration ‘: 2862[2021/03/30 09:42:11.905040.3] ../../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper

AS-REQ ) kerberos: authtime: 2021-03-30T 09:42:11. Unset starttime: endtime: 2021-03-30T19:42:11 update at Some point: 2021-04-06T09:42:11
[2021/03/30 09:42:11.905186,3] ../../source4/auth/kerberos/krb5_init_context.c:80(smb_krb5_debug_wrapper)
Kerberos: Client code types supported: arcfour-hmac-md5, aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, 28, -135, des-cbc-md5, aes256 -cts- hmac-sha1-96/aes256-cts-hmac-sha1-96
[2021/03/30 09:42:11.905232, 3] ../../source4/auth/kerberos/krb5_init_context.Kerberos: c:80(smb_krb5_debug_wrapper)
Requested: change Ok, flags canonicalization, routing
[2021-03-30 Resumable, 09:42:11.905895, 3] ../../source4/smbd/service_stream.c:67(stream_terminate_connection)
stream_terminate_connection: terminateconnections – ‘kdc_tcp_call_loop: tstream_read_pdu_blob_recv() – NT_STATUS_CONNECTION_DISCONNECTED’
[…]
controller

How do you solve domain problems?

check DNS connection The computer may still be using the wrong DNS server or not using it at all. Make sure this server name entry in /etc/resolv. conf becomes the IP address of a DNS server capable of resolving the domain tag you want to join . The IP address is assumed to belong to one of your domain controllers.

The resulting Samba domain has Kerberos queries through a Windows client (using DHCP, look for 192.168.15.10). Owner authentication worked fine (NT_STATUS_OK) but could end up with NT_STATUS_CONNECTION_DISCONNECTED. No real error indicates that what probably caused this. However, Windows then made two more attempts to access the then site name, stopped, and finally displayed the usually familiar error message.

Why did Samba fail to find DC for domain samdom-undetermined?

When a host is joined (advertised) to Active Directory, the Net command fails to find a Samba domain controller (dc): uses DNS lookups and broadcasts to find domain controllers when joining the world. Both methods don’t work, you just get an error. not found domain controller for SAMDOM domain – Unknown error.

Fehler Bei Der Uberprufung Des Domanenbeitritts Samba
Error En La Verificacion De Union Al Dominio Samba
Fel I Domananslutningsverifiering Samba
Oshibka Pri Proverke Prisoedineniya K Domenu Samba
도메인 가입 확인 삼바 오류
Errore Nella Verifica Dell Accesso Al Dominio Samba
Fout In Domein Join Verificatie Samba
Blad W Weryfikacji Dolaczenia Do Domeny Samba
Erro No Samba De Verificacao De Ingresso No Dominio
Erreur Dans La Verification De Jointure De Domaine Samba

Previous post Verschiedene Möglichkeiten Zur Behebung Von Bsod-Patches Für Vista
Next post Tipps Zur Fehlerbehebung Bei Verifizierungsfehlern Bei Samba-Domänenbeitritt